Applicable Regulations
Method Statement — Sequence of Work
- Review this RAMS and confirm site conditions match those described before work begins.
- Brief all operatives on the hazards, controls and PPE requirements below (toolbox talk).
- Check and don all required PPE, and inspect tools and equipment before use.
- Carry out the task in line with the control measures set out in the Hazard & Risk Assessment section below.
- Maintain good housekeeping throughout — keep the work area tidy and manage waste and materials safely.
- On completion, remove tools and equipment, restore the work area, and report any incidents, near misses or changes in site conditions to the site supervisor.
- Complete the sign-off section at the end of this document before leaving site.
Hazard & Risk Assessment
Each hazard is assessed against a standard Likelihood × Severity matrix. “Initial Risk” reflects the risk before any control measures are applied; “Residual Risk” reflects the risk once the stated controls are correctly implemented on site.
Striking Buried Services During Excavation
Control: Conduct a CAT & Genny scan and consult utility drawings before excavating the driveway base. Hand-dig trial holes near suspected service routes.
Exposure to Resin, Primer & Cement Dust
Control: Follow the COSHH data sheet for resin binder, primer and any cement-based products. Use RPE and ensure adequate ventilation during mixing and laying.
Manual Handling of Aggregates, Kerbs & Slabs
Control: Use a mini-dumper or wheelbarrow for moving aggregate. Team-lift heavy kerbs and paving slabs, keeping loads close to the body.
Plant & Vehicle Movement on Domestic Driveways
Control: Use a banksman for mini-digger or dumper movements on domestic driveways, and keep pedestrians and vehicles clear of the working area.
Weather Sensitivity of Resin Application
Control: Check temperature and rainfall forecasts before mixing and laying resin-bound surfacing, following the manufacturer's application window.
Required PPE
Emergency Procedures
Fire
Stop work immediately, raise the alarm and evacuate to the designated assembly point. Do not attempt to fight a fire beyond your training. Call 999 once safely evacuated if the fire brigade has not already been alerted.
First Aid / Injury
Stop work and alert the nearest first aider or site supervisor. For a serious injury, call 999 immediately and do not move a casualty unless there is immediate danger.
Spillage / Environmental Incident
Stop work, contain the spill using the site's spill kit if safe to do so, and report it to the site supervisor immediately. Do not allow any spillage to enter a drain or watercourse.
Frequently Asked Questions
Does this RAMS cover the resin binder used in resin bound driveways?
Yes. It includes COSHH-based controls for handling resin binder and primer safely, including ventilation and RPE requirements during mixing and laying.
Do I need to keep a copy of this RAMS on site?
Yes. HSE guidance expects a copy of the RAMS — along with the completed sign-off section — to be available on site for the duration of the work, and reviewed if site conditions change.