Preview your RAMS

Here's what this document covers. Unlock it to see the full control measures, PPE, method statement and more.

Rail Signalling & OLE Work RAMS Generator (UK)

✓ Site-Specific RAMS

Applicable Regulations

Electricity at Work Regulations 1989Railways and Other Guided Transport Systems (Safety) Regulations 2006 (ROGS)Work at Height Regulations 2005

Hazards Covered

This document identifies and provides a control measure for each hazard below, with a risk rating before and after controls.

Electric Shock from Overhead Line Equipment
Falls During Signal Gantry or OLE Structure Access
Being Struck by Rail Traffic
Manual Handling of Signalling & OLE Equipment
Testing & Commissioning of Signalling Systems

Unlocked after payment

The full control measure for each of the 5 hazards above
Required PPE list
A step-by-step method statement
Emergency procedures & contacts
FAQs and the sign-off section
A clean, watermark-free PDF — emailed to you and ready to download

Assessor / Competent Person NamePrinted on the document as the person responsible for this RAMS.

I confirm I am a competent person reviewing these details, and I accept the Terms & Declarations.

Declarations & User Acknowledgment: By generating this document, you acknowledge that Ramsforge (ramsforge.co.uk) provides automated documentation templates based strictly on user input. This tool does not conduct on-site inspections or act as a Health & Safety consultancy. The competent contractor/user retains full responsibility to review, verify site-specific conditions, and sign off on this RAMS prior to starting work.